一. Raw material preparation
Non woven substrate: Choose a suitable non-woven fabric, such as polypropylene (PP) or polyester (PET).
Adhesive: Common adhesives include acrylic, rubber, or silicone.
Release paper or release film: used to protect adhesives.
二. Coating
Coating equipment: Use a coating machine to evenly apply the adhesive onto non-woven fabric.
Coating method: Scraper, roller coating, or spray coating can be selected.
三. Drying
Drying equipment: Remove solvents from adhesives through ovens or infrared dryers.
Temperature control: Adjust the temperature according to the type of adhesive, usually between 50-150 ° C.
四. Composite
Composite equipment: Composite the adhesive coated non-woven fabric with release paper or release film.
Pressure control: Ensure uniform composite and no bubbles.

五. Cutting
Slitting equipment: Use a slitting machine to cut large rolls of material into the desired width.
Accuracy control: Ensure that the width and length meet the requirements.
六. Packaging
Packaging equipment: Automatically or manually roll the tape into small rolls and package them.
Identification: Indicate specifications, model, and production date.
七. Quality control
Testing equipment: Use viscometers, thickness gauges, etc. to test the performance of the tape.
Standard: Ensure that the product complies with relevant standards.
八. Storage and transportation
Storage conditions: Avoid high temperature, high humidity, and direct sunlight.
Transportation: Prevent compression and damage.
precautions
Environmental control: Keep the production environment clean and avoid dust.
Equipment maintenance: Regularly maintain the equipment to ensure normal operation.
Safety: Pay attention to safety during operation and wear protective equipment.
Through these steps, high-quality non-woven tape can be produced.

If you need non-woven tape, you can contact Ayida and I will provide you with a quotation within 24 hours.
